Hi Smart folks of this forum.

I had my iD4 MY21 repaired at a collision center, which during the 12V disconnect has caused my rear left door window motor to lose base coding.

I’ve tried to do window calibration,

Rolling down all the windows, rolling them up manually, pulling the window switch up to first notch until fully closed and holding it for 5 seconds. I did this individually for each window but this doesn’t seem to work.

the rear left window doesn’t work for auto up and down but when manually actuated works like it’s suppose to.

I’d appreciate your inputs on how to address this.

here is the log from OBDeleven


OBDeleven vehicle history log
Date: 2024-11-04 14:33:34

VIN: WVGGNPE27MP06XXXX
Car: Volkswagen
Year: 2021
Body type: UNKNOWN
Engine: EBRA kW ( hp) l
Mileage: UNKNOWN

---------------------------------------------------------------
BB Rear Left Door
System description: TSG HFS
Software number: 1EA959597E
Software version: 0551
Hardware number: 1EA959597
Hardware version: 003

Faults:
B148754 - Motor for window regulator
No basic setting
static
Priority - 5
Malfunction frequency counter - 1
Unlearning counter - 14
km-Mileage - 129931 km
date - 2024-11-01 21:42:49

U101300 - Control module not coded
static
Priority - 4
Malfunction frequency counter - 1
Unlearning counter - 14
km-Mileage - 129931 km
date - 2024-11-01 21:42:46