Volkswagen ID Forum banner
1 - 7 of 7 Posts

·
Registered User
Joined
·
12 Posts
Discussion Starter · #1 ·
Hi, I am little annoyed that the emblem side trim molding on the FE near the front door is just half and not fully completed like the pro-s. I tried searching the forum but didn't find anyone who tried to fix this so starting this thread.

Per my findings, it seems the part needed is the Emblem Trim Molding
Driver side part number seems like 11K-853-689-MIE. If this looks right, I will find the passenger side part number too.

Looks straight forward to DIY. Has anyone tried this, or anything to note?

4545
 

·
Registered User
ID.4 1st Edition Blue (acquired 4/20/2021)
Joined
·
129 Posts
Everything I have seen shows part of the Pro mounding as not lining up exactly with the FE (think it was the black part).
 

·
Registered User
Joined
·
5 Posts
For the few of us that have a Pro base trim and want to do this, here are both the left and right part numbers. Just from a visual inspection, seems like the front part of the emblem on the Pro is the same as the Pro S, just without the S, so the back part should line up

11K-853-689-MIE
11K-853-688-MIE

Everything I have seen shows part of the Pro mounding as not lining up exactly with the FE (think it was the black part).
 
1 - 7 of 7 Posts
Top