Add Yours: VW ID. Buzz Owner's Registry

USA ID.4 tow hitch

54590 Views 173 Replies 58 Participants Last post by hilld, Jan 3, 2022

RFRF

Discussion Starter · Apr 1, 2021

USA iD4 tow hitch - It's a bolt on so if it's not in your package you can mount an after market. I bet underlying bumper is same for all models as a matter of production efficiency. (EURO peps does your hitch mount to bumper in same manner?)
Pic is from a FE on US demo drive tour

Gadget Automotive design Camera accessory Automotive exterior Cameras & optics

See less See more

Reactions: 1

61 - 80 of 174 Posts

Skirmish

· #61 · Aug 16, 2021

I’ve actually considered the drive but could not justify the 16 hours each way. The free hitch is tempting though.

Pfrancis24

· #62 · Aug 16, 2021

Skirmish said:
I’ve actually considered the drive but could not justify the 16 hours each way. The free hitch is tempting though.

What about if we all chip in for the cost of charging???

Reactions: 1

Skirmish

· #63 · Aug 17, 2021

Pfrancis24 said:
What about if we all chip in for the cost of charging???

I only use Premium electrons in my baby. None of that “Super” or “Regular”.

Reactions: 5

Enzo589

· #64 · Aug 17, 2021

Pfrancis24 said:
What about if we all chip in for the cost of charging???

The charging would be free if there are EA stops on the way

Sameermr

· #65 · Aug 21, 2021

Pfrancis24 said:
Like some others here I have a 2” hitch mounted bike rack, in fact the same as @sethpo , like @mgwashburn and @tommyb I prefer the idea of no adapter. Also, I am happier buying an aftermarket hitch as they typically cost less. I expect one will become available but noticed this:

Class 3 Trailer Hitch, 2" Receiver, Select Volkswagen Tiguan

Driving the family up to the campground? Hauling tools and equipment from the home improvement store? Pulling your boat to the nearby swimming hole? Whatever your destination and whatever trailer you're towing, Bring It® with a CURT trailer hitch! CURT class 3 trailer hitches are designed, built...

www.curtmfg.com

Mounting pattern looks similar, anyone know if this will work? (Link is for a tiguan)

yes I tried the Tiguan 2” receiver. I had to drill two additional holes in the receiver to align with the cars. It fitted well after that. However with a slight angle lifting the far end of the luggage carrier up a lil bit.But it works well

Reactions: 1

Wilsonium

· #66 · Aug 21, 2021

It's not a 16 hour drive for me... well if you count 3 charge stops along the way maybe... but I would have stopped anyway. Would be a nice first road trip in the ID.4. I even have vacation scheduled next week.

Pfrancis24

· #67 · Aug 21, 2021

🤞

seacycle

· #68 · Aug 22, 2021

Pfrancis24 said:
Got my fingers crossed for a road trip @seacycle!!

I was informed that they got an ID.4 in last week to take measurements, and the hitch design was in process. So, I missed the free hitch option, but good news for everyone else.

Reactions: 4

Ron Rattie

· #69 · Aug 22, 2021

Sameermr said:
yes I tried the Tiguan 2” receiver. I had to drill two additional holes in the receiver to align with the cars. It fitted well after that. However with a slight angle lifting the far end of the luggage carrier up a lil bit.But it works well

Can you post a photo?

toomanywords

· #70 · Aug 23, 2021

DrawTite has a hitch on the market now for the ID.4: 2021 Volkswagen ID 4 Trailer Hitch | etrailer.com

Looks pretty good! Says it's shipping after Labor Day.

Reactions: 5

Pfrancis24

· #71 · Aug 23, 2021

Looks nice, though it does mention possible trimming of bumper cover/fascia during reinstall:
”Trimming may be needed to reattach panel or fascia”

This would be a little disappointing given there is already an opening. It wouldn’t be a deal breaker for me though as it would probably be in an unseen area of the car. Had to do similar on my Mazda 3 hatch and I could see that. Hoping to see an install vid or pics before I take the plunge.

Skirmish

· #72 · Aug 23, 2021

Pfrancis24 said:
Looks nice, though it does mention possible trimming of bumper cover/fascia during reinstall:
”Trimming may be needed to reattach panel or fascia”

This would be a little disappointing given there is already an opening. It wouldn’t be a deal breaker for me though as it would probably be in an unseen area of the car. Had to do similar on my Mazda 3 hatch and I could see that. Hoping to see an install vid or pics before I take the plunge.

I’m guessing they are covering bases until they can get a product in for testing. They currently have the install rated as a 10/10 difficulty probably so they don’t under sell how hard it is before knowing for sure.

toomanywords

· #73 · Aug 23, 2021

They have an installation document on the DrawTite site, where they seem to have tried it: https://www.draw-tite.com/product-assets/install/N76521.pdf

Reactions: 3

Pfrancis24

· #74 · Aug 23, 2021

Hm, seems about as easy as the install on my last car. Main difference is trimming off WAY more material…

Reactions: 2

JPWhite

· #75 · Aug 24, 2021

Skirmish said:
I only use Premium electrons in my baby. None of that “Super” or “Regular”.

My electrons are ethanol free.

Reactions: 3

Special-K

· #76 · Aug 25, 2021 (Edited)

toomanywords said:
DrawTite has a hitch on the market now for the ID.4: 2021 Volkswagen ID 4 Trailer Hitch | etrailer.com

Looks pretty good! Says it's shipping after Labor Day.

I don't know much about hitch but why this one is capped at 2000lbs when the included one in the AWD goes to 2700lbs. 2200lbs for the RWD version(not included in Canada). This one also looks more heavy duty.

mochalatte

· #77 · Aug 25, 2021

Special-K said:
I don't know much about hitch but why this one is capped at 2000lbs when the included one in the AWD goes to 2700lbs. 2200lbs for the RWD version(not included in Canada). This one also looks more heavy duty.

The VW hitch replaces the impact bar, right? This one looks like it is installed in addition to the existing impact bar, which would explain the lower rating.

Reactions: 1

J. Walter Weatherman

· #78 · Aug 25, 2021

mochalatte said:
The VW hitch replaces the impact bar, right?

No, the VW one was a separate crossbar that mounted behind the impact bar.
Here is the impact bar: 2021 Volkswagen ID.4 Bumper. Impact bar. Silver, Group, Gray, Blue, Black - 11A807305 - Genuine Volkswagen Part

And here is the cross member for the hitch: Type 1. Type 2. Type 3. Type 4. From 09/28/2020. To 09/28/2020.. 2021 Volkswagen ID.4

J. Walter Weatherman

· #79 · Aug 25, 2021

toomanywords said:
DrawTite has a hitch on the market now for the ID.4: 2021 Volkswagen ID 4 Trailer Hitch | etrailer.com

Looks pretty good! Says it's shipping after Labor Day.

I just ordered it. Says delivery is expected September 10. I will be sure to update once I receive and install it.

I am really happy to see that it is 2", so I can use my existing bike rack. And the price is lightyears better than trying to add the OEM hitch.

Keowee

· #80 · Aug 25, 2021 (Edited)

J. Walter Weatherman said:
I just ordered it. Says delivery is expected September 10. I will be sure to update once I receive and install it.

I am really happy to see that it is 2", so I can use my existing bike rack. And the price is lightyears better than trying to add the OEM hitch.

I also ordered a hitch kit with similar delivery. I was very happy with eTrailer hitch on VW Jetta in past. Hope this goes on as "easy"

61 - 80 of 174 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.