[Big Blue]

Is it normal for the tire pressure tab to remain highlighted like this? I have verified that the pressure is correct for all four tires and verified it in the system but this green check mark still remains. It has been like this since purchase. Curious as to whether this is the normal status or not.

 

[Tinman]

Yes. I think you can think of the green check like, "OK".

You do have one message below it you should probably check, if you haven't already.

 

[Huey52]

Be reminded that if you significantly modify your tire pressure, say to accommodate seasonal ambient temperature changes, you need to reset the TPMS alert threshold in the infotainment system.

 

[Big Blue]

Okay. Thanks. I did check that message. It was some odd minor matter. I wouldn't have even known about it if I hadn't gone into the Vehicle status tab.

 

[MurrietaID4]

Im new, but I read that the ID.4 will not display tire pressure?

But under Units / Tire Pressure you can select psi via infotainment

Odd I cant find tire pressure.

 

[nigela]

Im new, but I read that the ID.4 will not display tire pressure?

But under Units / Tire Pressure you can select psi via infotainment

Odd I cant find tire pressure.

Correct, it do not display tire pressure. It will warn for low pressure.

 

[VW TECHNICIAN]

Id4 has no pressure sensors in the wheels....they use abs sensors to determine loss of tire pressure ( when you call for calibration it will memorize tire diameter and from there when it falls from predetermined threshold it will alarm you about tire pressure loss)

 

[Tinman]

Id4 has no pressure sensors in the wheels....they use abs sensors to determine loss of tire pressure ( when you call for calibration it will memorize tire diameter and from there when it falls from predetermined threshold it will alarm you about tire pressure loss)

Would resetting the calibration prevent ABS interference when a spare tire of slightly different circumference is installed?

 

[VW TECHNICIAN]

Would resetting the calibration prevent ABS interference when a spare tire of slightly different circumference is installed?

0.6 inches will exceed calibration threshold.
But you will be aware of this anyway if using spare that is different diameter.

 

[VW TECHNICIAN]

Would resetting the calibration prevent ABS interference when a spare tire of slightly different circumference is installed?

Regarding abs function in emergency stopping will still be operational even with different tire diameter on one side...... ZF electronic brake booster is quite amazing peace of engineering.

 

[Tinman]

Regarding abs function in emergency stopping will still be operational even with different tire diameter on one side...... ZF electronic brake booster is quite amazing peace of engineering.

Thanks for the reply and all the good information you provide on this forum.

I should have used the term, "traction control", not ABS. The ZF does indeed seem quite robust. I recently saw a video of a Model Y spare tire solution that was no solution because it triggered traction control continuously. I was thinking that re-calibrating the ID.4 tire pressure settings might avoid it on a larger spare tire difference than .6 inches, which was about the distance slightly being exceeded by the Model Y spare.