[NoChrger]

So far so good. Was a little concerned while installing it that I might crack the grill. But I actually forgot it was in place after a while.

 

[Pfrancis24]

Looks like I remember… I’ll add another pic once I have mine mounted!

 

[Pfrancis24]

Finally picked them up/put them on. Very pleased with the result.

 

[NoChrger]

Hey there Pfrancis24. Looks good. I am probably going to add rubber bumpers to the back so encase of someone parking by braille I don't suffer a damaged grille. Nice to see a Marylander!!!

 

[Pfrancis24]

That’s a nice idea! I think I’ll do similar.

 

[yoitsspence]

We did this same one but it seem to mess with the sensor.

Here's what I have. It's a WIP but so far it's starting to look good. I need to move it like 1" to the right. I didn't see the SlyBrackets before I started down this option. I may opt for that but the plate needs to be at least 12" off the ground here in California... for years of no front plate I don't want to push my luck.

View attachment 4437 View attachment 4438

 

[yoitsspence]

View attachment 4989 View attachment 4990 View attachment 4991
Finally picked them up/put them on. Very pleased with the result.

Where did you get this one from? I want it.

 

[Pfrancis24]

Sly Brackets - No-drill Front License Plate Bracket Holder Mounts For All Car Types - East To Install - No Holes - No Drills

True No-drill front license plate bracket holder mounts for all car types. Easy installation and video tutorial. No holes, no drills...

www.slybrackets.com

 

[tazzgonzo]

View attachment 4989 View attachment 4990 View attachment 4991
Finally picked them up/put them on. Very pleased with the result.

Hi there! My dealer didn't mount the front plate bracker so I've been looking for DIY options and came across this. How's the screwless mount working out for you? Any issues with the sensors? I just placed my order for one because of how good it looked in your pics, so thank you!

Thank you!

 

[Pfrancis24]

Nonissue for sensors are they are out wider. Care will be needed when/if parallel parking.

 

[NoChrger]

When you go on the website you identify the car you are using them with. When you pick out the options you should be all set. Secured everything in a 30 run including precheck location fit.

 

[2928]

Decided what the heck and purchased the Sly Bracket. It arrived within 3 days. Put it on Saturday morning with no issues. I think I may add a rubber spacer behind it so that there is a contact between the rear of the plate and the bumper. It is attached to the lower grille and would likely damage the grille in a Front impact.

Looks good! It doesn't look like it blocks the air going into the grille, right?

 

[NoChrger]

Very Minimal the plate is mostly in the bumper area.

 

[2928]

Very Minimal the plate is mostly in the bumper area.

Thanks! Hope they get back in stock soon - don’t really like the off-centered look of the tow hook mounts so this would be a good way to avoid drilling the bumper.

 

[2928]

The SlyBracket is available to order again - they’re shipping on the 27th per the website. Order submitted and fingers crossed!

 

[Edgarsraiders]

Here's what I have. It's a WIP but so far it's starting to look good. I need to move it like 1" to the right. I didn't see the SlyBrackets before I started down this option. I may opt for that but the plate needs to be at least 12" off the ground here in California... for years of no front plate I don't want to push my luck.

View attachment 4437 View attachment 4438

Do you have a link or the name of the bracket you used?

 

[mlsstl]

I received my Slybracket a few days ago and installed it yesterday. The parts are good quality and it was easy to install with the included instructions. Finally, it looks great on the car. Easy enough to find at slybrackets.com. It's a few bucks pricier that it probably should be, but then I haven't seen anything else quite like it.

 

[NoChrger]

TRUE No-drill License Plate holder mount bracket relocator

No drill License Plate Brackets holder mount relocator for Cars, Trucks and SUV's. ACURA, AUDI, BMW, CADILLAC, DODGE, HONDA, MERCEDES...

www.slybrackets.com

 

[KR23]

where did you the Bolts and bracket? I haven’t found one :/

 

[2928]

I received my Slybracket a few days ago and installed it yesterday. The parts are good quality and it was easy to install with the included instructions. Finally, it looks great on the car. Easy enough to find at slybrackets.com. It's a few bucks pricier that it probably should be, but then I haven't seen anything else quite like it.

Just curious since my plates haven’t arrived yet, but my bracket has and I was waiting to put it on… did you need to use the spacers? And did you put rubber bumpers on the back? (Someone with a Tesla suggested the latter as someone tapped his bracket in a parking space and the screws gouged his bumper) Thanks in advance!