Volkswagen ID Forum banner
781 - 800 of 1,447 Posts
Initiate call in vehicle for emergency services.... once it has established connection.... and screen shows...first calling....then shows active ( call established). End call. And try again and see if parked location is working. O
Tried, the call displayed my coordinates which were different than the last parking location in carnet. Didn’t resolve the issue.

Another Canadian owner, without any obd mods reported the same issue so it’s quite possible carnet is having technical difficulties.

thanks for your help!
 
Tried, the call displayed my coordinates which were different than the last parking location in carnet. Didn’t resolve the issue.

Another Canadian owner, without any obd mods reported the same issue so it’s quite possible carnet is having technical difficulties.

thanks for your help!
I have been experiencing this in US at eastern markets.....there is definitely need for app update and server sync bug.
 
Thanks for that, was just about ready to pull fuse 19.
Just to confirm, you didn’t apply the mod that hides the nagging user profile selection?
Mine has not updated parking location since the morning of the 18th - I haven’t done any mods. Could be a Canada thing.
This is not obd mod related. Most probably a Canada thing.
I don't even have the obdelevn module and came across your post while searching for a solution for my gps location stopped working.

My last reported parked location was since the 17th as well.
 
Can anyone with a front parking camera or 360 parking camera post their module settings?

or if anyone knows how to enable the retrofit
There are some German websites that sell all parts needed for factory retrofit and instructions how to get it done. Not complicated if you have money to burn. And it will be as factory installed.
 
There are some German websites that sell all parts needed for factory retrofit and instructions how to get it done. Not complicated if you have money to burn. And it will be as factory installed.
I went searching after your mention. Money to burn = €2,414.00. 🤑 Agreed too pricey for me, but still would be nice.

 
I went searching after your mention. Money to burn = €2,414.00. 🤑 Agreed too pricey for me, but still would be nice.

I saw that too… but too rich for me :) Also, no mention of whether you need to get a new bumper cover painted, since I assume that’s a new part on the 360 cars.
 
I went searching after your mention.
Looking at their retrofits before, I've wondered if the "This must be done by a workshop with valid GEKO access" condition of unlocking the modules for use with the dongle could be done with OBDEleven (do they stay unlocked for a half hour?) or if we would need to find a friendly shop.

I suspect that VW Dealerships would generally be reluctant to do this work, but maybe I'm wrong...
 
I got all the OEM parts and wiring harness for $550 on Aliexpress, manual on EdWin and OBDeleven (geko unlock + coding) for $110 so just now need the coding parameters :)

eg Mk7.5 gti highline camera retrofit | OBDeleven



I went searching after your mention. Money to burn = €2,414.00. 🤑 Agreed too pricey for me, but still would be nice.

 
There are some German websites that sell all parts needed for factory retrofit and instructions how to get it done. Not complicated if you have money to burn. And it will be as factory installed.
Is there a potential for impact to future software update as it would not have been part of the original configuration linked to the VIN?
 
Reset “Basic Settings” for Easy Open/Close (Kick-to-open/close) Tailgate.

I needed to perform these AFTER my 2021 S/W was updated to 3.1 in addition to the Seat Memory “programming” (I posted steps - OBDEleven not needed to reset the seat memory in another post). I simply copied the settings from my 2022 (w/3.1 S/W) and then everything worked, as expected. Saved a 1.5 hour/each way + waiting at dealer for re-do. If this didn’t work, I was going to wait until the 40K service and have them do it. But - it’s done. Sharing, as recommended.


Image


Image


Image
 
If anyone knows the equivalent to:
“19 → adaptation → Installation list → specified installations - Camera System Rear View → coded”
It may be worthwhile posting your model year and info from your 19 gateway module. I had a look at my 2021 and could not find “installation list” under 19.
 
It may be worthwhile posting your model year and info from your 19 gateway module. I had a look at my 2021 and could not find “installation list” under 19.
Yeah that’s the step/names on a different model, I’m not sure what it looks like on ID4 / MEB. Didn’t see anything obviously related

Have a 2022, all ID4 models/years should be the same but not sure how to add a module/equipment to gateway for ID4s / what to edit -does anyone know?
 
Hello Dear Friends, I Have VW ID4, I Wanted To See The "Safety Belt Warning" Settings In OBD11 Gen2, 5F Multimedia - Adaptations - "Safety Belt Warning", I Wanted To Ask Sorry Maybe Who Knows What Each Value Means, I Changed Belt Warning Value From “Rdw eu ncap” To “Us” But Unfortunately Didn’t Seen Difference So Far, I Would Like To See If It Is Possible To Change The Sound Warning About Safety Belt By Time Or By Some, Since I Don't Want To Turn It Off Completely, Thank You All.

I'll Attach A Photo From Below, Thank You Again.


Image
 
Hello Dear Friends, I Have VW ID4, I Wanted To See The "Safety Belt Warning" Settings In OBD11 Gen2, 5F Multimedia - Adaptations - "Safety Belt Warning", I Wanted To Ask Sorry Maybe Who Knows What Each Value Means, I Changed Belt Warning Value From “Rdw eu ncap” To “Us” But Unfortunately Didn’t Seen Difference So Far, I Would Like To See If It Is Possible To Change The Sound Warning About Safety Belt By Time Or By Some, Since I Don't Want To Turn It Off Completely, Thank You All.

I'll Attach A Photo From Below, Thank You Again.


View attachment 24611
Selection “Off?” Have you tried that?
 
781 - 800 of 1,447 Posts