It is lease of purchase. You figure out the details of that with the dealer at time of delivery.

The hitch appears to be 1 1/4”. Maybe folks who have seen it in person want to pitch in?

 

Is it possible to reserve a vehicle with a pre-installed hitch on the RWD option? There didn't seem to be an option for this. Is this something that can be installed afterwards at the dealer? By the way, do people know whether the hitch on the RWD will be a 2 inch hitch? There were some indications elsewhere about its towing capacity but not the actual size. I ask because I have a bike rack I'd want to use.

I'm not sure this will be of much help, but I saw your message yesterday and since the response has been limited I'll tell you what I think.

As far as a pre-installed hitch option for RWD...I haven't seen that anywhere. The order guide posted by @sprylo (link) doesn't list such an option, so as currently planned I don't think there will be a factory option. Maybe this will change.

For dealer install, I'm sure it's possible but the hitch drops through a slot in the bumper. Unless all the bumpers are built with this slot (maybe covered with a temporary plate) the dealer would need to cut it themselves. It does seem reasonable that there will some type of post factory install option, either by VW or 3rd party.

I haven't seen anything that mentions size of hitch, but worst case you could always use an adapter. My guess is different than @ChristophW. I'm assuming the factory hitch is a 2" receiver, but that's just a guess.

 

If you dig thru all the pictures on this forum you will see one that includes a poor shot of a hitch on an ID.4. It is not a 2" hitch receiver, it is the smaller 1-1/4" hitch receiver. The US gets a receiver mount, not the drop down ball that Europe gets. It will be a class II hitch as the car is rated to tow either 2500 lbs or 2700 lbs depending on if you get the RWD or AWD option. A class I hitch is only good for 2000 lbs, class II is good for 3500 lbs. Those tow ratings require brakes on the trailer.

 

If you dig thru all the pictures on this forum you will see one that includes a poor shot of a hitch on an ID.4. It is not a 2" hitch receiver, it is the smaller 1-1/4" hitch receiver.

I had seen the photo before and still guessed 2". After just looking at what VW offers for the Tiguan, I concur now that the hitch will be a 1-1/4".

 

Thank you for your replies. I agree based on the pictures online that it looks like a 1.25 inch hitch. Not a deal breaker, but hopefully they will have a factory option. I know some manufacturers will void warranties if you install your own hitch, so obviously would want to make sure there was a factory option.

 

The Order Guide has the hitch being factory installed, on both the FE and AWD. It doesn't indicate what size however.

Trailer hitch, factory-installed (up to 2,700 lbs. towing capacity) AWD Only
Trailer hitch, factory-installed (up to 2,200 lbs. towing capacity) First Edition

 

Based on pictures and towing capacities, it is a 1.25" class II receiver hitch.

 

I talked to a VW corporate rep Fri & hitches are available on First Editions & AWD models only. A hitch is not available, factory installed, on a RWD model. SoCal bike rider here, too.

 

I switched from PRO S RWD to a FE last week when they opened them back up so I could get the factory hitch receiver. VWOA confirmed that you could add a hitch after purchase through your dealer, but it seems you get a different answer on that depending on who you speak to. Only problem for me is the white steering wheel on the FE. I will have to keep leather cleaner in the car so my steering wheel doesn’t get grimy looking.

 

btw: Zaino "leather in a bottle" and Griot's Garage "leather care" are my fav's, and you also can't go wrong with more readily available Mothers products in my experience. Work well on vinyl too, so assuages my own anal white steering wheel cleanliness concerns.

And back on topic, when I switched my reservation to FE last week I noted for the US market that it comes with a hitch socket (no ball).

 

Do you suppose the hitch receiver includes the trailer wiring?

 

My experience with the 2018 Atlas was that only the high-line trim included both the receiver and the 7-round connector with wires. The next trim line down included the receiver but no connector for any wires.

Other owners have reported that the standard wiring harness does also include the wires that support a braked trailer, but there is no Trailer Brake Controller included with the vehicle - it must be purchased separately as an option.

It sounds like that may be the way VWOA is working trailer pieces and which we will also see with the FEs.

 

Does anyone have the parts number for the hitch?
Speaking of which, is there a working id.4 parts fiche yet?

 

Does anyone have the parts number for the hitch?
Speaking of which, is there a working id.4 parts fiche yet?

Might be on the image in this post:

US ID.4 First Edition tow hitch

I didn’t get to test drive but I did get to see a demo model today at a dealership. Here’s an up close view of the tow hitch. It is labeled class 2. Also says 2700 lbs, but I thought that was the AWD rating, not first edition rating. There is a plastic plate where a trailer wire connector could...

www.vwidtalk.com

 

I am expecting my ID.4 Pro to arrive here in northern Alabama any day. I too would like to install a type 1 trailer hitch receiver to only attach my existing bike racks, not to tow a trailer.

 

It looks like part 11A-803-881-A (per the label on the hitch) costs under $500. The mystery is: is that all you need to add a hitch to a base model PRO (plus cutting a hole in the bumper) or is the wiring harness missing also (the plug above that, which you plug the 7-pin trailer adapter into). There may be another electronic part needed to get trailer lights/power.

 

The hitch is held on with (4) 16mm bolts. I removed mine in three minutes and put the bolts back so the threads don't get rusty. I wouldn't be surprised if a lot of people on this forum would be willing to sell theirs.